Furniture
Baseboard heater clearance from furniture and curtains
The 6 in rule is printed, and so is 12 in. They belong to different heaters.
On this page (9 sections)
- What a baseboard heater is, and where the gap is measured
- Six electric heaters, five makers: the clearance table
- Curtains: where the hem can end
- Worked through: curtain length over a 6 3/4 in heater
- A sofa against the heater wall: 6 to 15 in lost
- Hot water baseboard: no fire gap, but it still needs air
- How to tell which heater you have
- What these figures do not cover
- Six checks before you place furniture or hang curtains
Short answer
12 in (305 mm) in front of a Cadet electric baseboard heater, 6 in (152 mm) for Marley's D series and King's K series, and 3 in (76 mm) for Ouellet and Indeeco. The label tells you which. Floor-length curtains may hang in front of most, 1 to 1 1/2 in (25 to 38 mm) off the floor and 1 1/2 to 3 in clear of the face, but not in front of a Cadet. Hot water baseboard has no fire gap at all.
The numbers, at a glance
- Cadet F series, in front and above
- 12 in (305 mm)6 in (152 mm) at both ends; curtains 12 in above
- Marley D series, furniture
- 6 in (152 mm)Also 6 in above and in front, recommended
- King K series, furniture
- 6 in (152 mm)"To allow for proper air flow"
- Ouellet ODL and Indeeco BCHI
- 3 in (76 mm)Furniture and curtains, from the front
- King CB series, furniture
- 16 to 24 in (406 to 610 mm)From the curtains, in its drapery drawing
- Long curtain, gap to the heater face
- 1 1/2 to 3 in (38 to 76 mm)King 1 1/2, Marley 2, Ouellet 3; Cadet 12
- Long curtain hem above the floor
- 1 to 1 1/2 in (25 to 38 mm)Marley and Ouellet 1 in, King 1 1/2 in
- Short curtain hem above the heater
- 4 to 12 in (102 to 305 mm)King CB 4, Marley and King K 6, Cadet 12
- Hot water baseboard
- No fire gapSlant/Fin: furniture and drapes may touch it
Keep furniture 12 in (305 mm) from a Cadet electric baseboard heater, 6 in (152 mm) from a Marley D series or a King K series, and 3 in (76 mm) from an Ouellet or Indeeco. Each is printed in the maker's manual, so 6 in is real but not universal. Curtains split the same way. Most makers let a floor-length curtain hang in front of the heater with a small gap, but Cadet does not. Hot water baseboard is a different machine, and no maker on this page gives it a fire gap at all.
What a baseboard heater is, and where the gap is measured#
A baseboard heater is a long, low heater fixed along the bottom of a wall, usually under a window. It has no fan. Cool air enters a slot near the floor, passes over a hot element inside, and leaves through a slot along the top. King's K series drawing labels the two openings "air intake" and "warm air exhaust". That moving column of air is how the heater warms the room.
There are two kinds, and they look much alike.
- An electric baseboard heater has an electric element inside and a power cable at one end. It may have a built-in thermostat, which Ouellet and Marley offer as options. The six heaters in the table below are all electric.
- A hot water (hydronic) baseboard has a copper pipe with aluminium fins, fed with hot water from a boiler. Slant/Fin's ratings run from 140 to 220 F (60 to 104 C) water. It has pipes, not a cable.
Clearance is the open air between the heater and the nearest object. As with a wood stove, the heater's own label sets it, not a general rule. Every manual here measures it from the heater, not the wall. Ouellet says "from the front of the heater". Marley says "the extreme front of the heater". So the back of a sofa sits the heater's depth plus the clearance from the wall. King prints its CB heater, in its CB spec sheet, at 3 3/16 in (81 mm) deep and 6 3/4 in (171 mm) high. The site's glossary uses the same word for the empty space a fixture or piece of furniture needs.
Six electric heaters, five makers: the clearance table#
The table gathers the furniture and curtain figures from the six manuals. Each cell is the maker's own figure, from text or from the drapery drawing named in the source column.
| Heater | Furniture in front | Above | Ends | Source |
|---|---|---|---|---|
| Cadet F series, 2F350 to 10F2500 | 12 in (305 mm) | 12 in (305 mm) | 6 in (152 mm) | Owner's guide, text |
| Marley D series | 6 in (152 mm) | 6 in (152 mm) | None given | Install manual, text |
| King K series | 6 in (152 mm) | 6 in (152 mm) | None given | Install manual, text |
| King CB series | 16 to 24 in (406 to 610 mm) from the curtains | None given | None given | Install guide, drawing |
| Ouellet ODL | 3 in (76 mm) | None given | None given | Instructions, text |
| Indeeco BCHI | 3 in (76 mm) | None given | None given | Owner's manual, text |
Cadet's wording is the strictest. It says "Heater must be kept clear of all obstructions: minimum of 12 inches in front and above, 6 inches on both sides", under a warning headed "Risk of Fire". It lists furniture, pillows, bedding, papers, clothes and curtains as things to keep away.
Marley and King's K series print the same 6 in, framed a little more softly. Marley says "For efficient and safe operation, we recommend" 6 in above and in front. It adds "Do not place furniture against heater." King's K manual repeats Marley's sentence, 6 in above and in front, and gives furniture 6 in "to allow for proper air flow".
Ouellet and Indeeco's BCHI manual print the same text word for word: keep furniture, pillows, bedding, papers, clothes and curtains "at least 3 in. (76 mm) from the front of the heater". Both also recommend 3 in of air flow space.
King's CB installation guide is the odd one. Its text only says to keep "any bulky furniture" away. Its only number is in the drapery drawing, which shows a chair 16 to 24 in (406 to 610 mm) from the curtains. It is the largest furniture figure on this page, and it is a drawing, not a sentence, so read it as King's picture of a safe room.
Curtains: where the hem can end#
Curtains have two rules, because a curtain can end in two places. A long curtain hangs in front of the heater, down to near the floor. A short curtain stops above the heater. The table sets out what each maker allows.
Cadet is the shortest to state. It asks for 12 in (305 mm) from "objects hanging above (i.e. drapes)", and its 12 in in front applies to a long curtain as much as to a chair. Marley's text gives a long curtain 1 in (25 mm) above the carpet or tile and 2 in (51 mm) from the front of the heater to the nearest fold, with the curtain open. A short curtain gets 6 in (152 mm) above the heater. King draws its figures rather than writing them. The K series drawing shows 1 1/2 in (38 mm) from the heater front and above the finished floor, and 6 in above the heater. The CB drawing shows the same 1 1/2 in twice, and 4 in (102 mm) above the heater. Ouellet's drawing shows 3 in (76 mm) from the front and 1 in at the floor.
| Heater | Long curtain: gap to heater face | Long curtain: hem above floor | Short curtain: hem above heater top |
|---|---|---|---|
| Cadet F series | 12 in (305 mm), from "12 inches in front" | Not given | 12 in (305 mm) |
| Marley D series | 2 in (51 mm), measured with the curtain open | 1 in (25 mm), above the carpet or tile | 6 in (152 mm) |
| King K series | 1 1/2 in (38 mm) | 1 1/2 in (38 mm), above the finished floor | 6 in (152 mm) |
| King CB series | 1 1/2 in (38 mm) | 1 1/2 in (38 mm), above the carpet | 4 in (102 mm) |
| Ouellet ODL and Indeeco BCHI | 3 in (76 mm) | 1 in (25 mm) | Not given |
Marley adds two rules. A long curtain must reach below the heater's centre line. And there must be 1 in (25 mm) between the top of the curtain and the ceiling, which King's CB drawing sets at 1 1/2 in (38 mm). Ouellet asks for 1 in at the top and bottom of a curtain that covers the wall.
Marley and King's K series also say not to fit a heater below vinyl or plastic blinds or curtains, because the warm air can damage them. For the general rules on drops and hems, see curtain length and rod height.
Worked through: curtain length over a 6 3/4 in heater#
Take a window with a heater under it, 6 3/4 in (171 mm) high and 3 3/16 in (81 mm) deep, the size King prints for its CB series. Suppose you want curtains on this window. Here is how the six manuals play out.
Floor-length curtains on the King CB. The hem goes 1 1/2 in (38 mm) above the carpet. The back of the fabric must sit 1 1/2 in in front of the heater. So the rod has to hold the curtain at least 3 3/16 + 1 1/2 = 4 11/16 in (119 mm) out from the wall.
The same curtains under the other makers' rules. With the same depth of heater, Marley's 2 in (51 mm) gap puts the fabric 5 3/16 in (132 mm) out, and Ouellet's 3 in puts it 6 3/16 in (157 mm) out. Cadet's 12 in puts it 15 3/16 in (386 mm) out. The site's blinds and shades page gives 3 to 5 in (8 to 13 cm) as the usual bracket projection for a curtain over a blind. Only King's figure fits inside that. For Marley and Ouellet, buy a deeper bracket and check its stated projection.
Marley measures with the curtain open, because a curtain pushed back bunches into folds that stand further out. Fold depth depends on fullness, which curtain width and fullness covers.
Short curtains. The hem must clear the heater top by 4 in (102 mm) on the CB. That puts it at 6 3/4 + 4 = 10 3/4 in (273 mm) above the floor. On a Marley or King K the same arithmetic gives 12 3/4 in (324 mm). On a Cadet it gives 18 3/4 in (476 mm). A curtain that stops at the sill usually clears all three, but measure the sill. The curtain size calculator works out the drop once you know where the hem must end.
So a long curtain works on every heater here but the Cadet, if the bracket is deep enough. On a Cadet, hang a short curtain.
A sofa against the heater wall: 6 to 15 in lost#
Now take the site's default sofa, 84 x 38 in (213 x 97 cm) from sofa dimensions, and suppose the only long wall has the same 3 3/16 in (81 mm) heater along it. The back of the sofa sits at the heater's depth plus the maker's gap.
| Heater | Gap to heater face | Wall to back of sofa | Wall to front of sofa |
|---|---|---|---|
| No heater | None | 0 in | 38 in (97 cm) |
| Ouellet ODL, Indeeco BCHI | 3 in (76 mm) | 6 3/16 in (157 mm) | 44 3/16 in (112 cm) |
| Marley D, King K | 6 in (152 mm) | 9 3/16 in (233 mm) | 47 3/16 in (120 cm) |
| Cadet F | 12 in (305 mm) | 15 3/16 in (386 mm) | 53 3/16 in (135 cm) |
That gap comes out of the room in front of the sofa, and the coffee table and path move forward with it. On a Cadet wall, the sofa takes 53 in of the room's depth instead of 38 in.
Two choices follow. Put the sofa on a wall without a heater, and the 15 in comes back. Or keep the wall and plan the rest of the room from the sofa's new front edge, as living room seating layout dimensions does for the usual groupings. The sofa and seating fit checker takes the depth as an input, so enter the sofa plus the gap, not the sofa alone.
The gap is dead space, not a walkway. Nobody passes through 6 or 15 in, and walkway and circulation widths asks for 30 in (76 cm) or more.
A recliner already needs its own gap behind it to tilt back: 3 to 7 in (8 to 18 cm) for a wall-hugger and 12 in (30 cm) for a rocker, in recliner dimensions and the clearance behind. On a heater wall both rules apply, so use whichever is larger.
The same arithmetic covers a bed. A bed is furniture, and Cadet lists bedding by name. So the headboard or the side rail goes at the gap, and so does any duvet or valance that hangs down. The space left around the rest of the bed is in bedroom clearances. A cot needs more. The site's nursery layout and clearances keeps a cot 36 in (91 cm) from a radiator, because a standing toddler can reach past the rail. That figure is about the child, not the heater, and it is larger than every gap here.
Hot water baseboard: no fire gap, but it still needs air#
Slant/Fin, a maker of hot water baseboard, tells buyers they are "free to locate furniture and drapes near or even touching the baseboard heating". No electric manual here says anything like that.
The reason to leave a gap is heat output, not fire. The Journal of Light Construction explains that most of the heat from fin-tube baseboard is convective. Hot water warms the fins, warm air rises out of the slot at the top, and cool air flows in at floor level. Block either opening and less air moves. JLC tells installers to leave at least 1 in (25 mm) under the cover, so the finished floor does not block the air coming in.
There is no maker's figure for furniture. Contributors to a HeatingHelp forum thread suggested 1 in of air under the furniture and at the wall, and one suggested pulling a sofa 6 to 8 in (152 to 203 mm) out. Another, a trainer for Caleffi, said carpet too close to the bottom and drapes that block the top opening hurt a convector. Treat that as trade advice, not a rule.
So the hydronic rule reads the other way. Nothing will catch fire if a sofa touches it. The room will just be colder, and a skirted sofa that seals the bottom slot is the worst case.
How to tell which heater you have#
An electric heater has a wiring box at one end and a nameplate giving its voltage: 208 or 240 volts on Cadet's F series, and 120, 208 or 240 on King's CB. A hot water baseboard has copper pipe running through it. If it has pipes, it is hydronic.
If the label is gone and you cannot tell the maker, use 12 in (305 mm). That meets the Cadet rule and every other electric manual on this page, except the King CB drawing. It costs floor, but it satisfies every written figure here.
What these figures do not cover#
These figures come from six electric baseboard manuals and one hot water brochure. They do not cover other makers or other models, even from the same brand. Cadet's guide covers its F series, and its other heaters may differ. A heater's own label and manual always win over this table.
They do not cover portable heaters, wall fan heaters, cast iron radiators or steam radiators. They do not cover bathrooms, which have their own rules. They are not a fire code, and a landlord, insurer or inspector may ask for more.
They also do not cover the heater's own fitting: wiring, circuit size, thermostats or the gap to an outlet above. Marley and King's K series both say not to install a heater below an outlet, and every electric manual says to keep cords away from the heater. Have an electrician fit or move one, and see the electrical section for outlet and switch heights.
The worked cases use King's CB size, 6 3/4 x 3 3/16 in, for every maker. Other heaters differ. Measure your own heater's height and depth, and redo the sums.
Six checks before you place furniture or hang curtains#
For the sizes of everything you might put in front of a heater, start from furniture dimensions.
Frequently asked questions#
How far should furniture be from a baseboard heater?
It depends on the maker, and the label tells you which. Cadet's F series needs 12 in (305 mm) in front and above and 6 in (152 mm) at the ends. Marley's D series and King's K series ask for 6 in. Ouellet and Indeeco ask for 3 in (76 mm). If the label is gone, use 12 in, because that meets every electric manual on this page except King's CB drawing.
Can curtains hang over a baseboard heater?
Yes on most electric heaters, if they follow the drawing. Marley wants the hem 1 in (25 mm) off the floor and 2 in (51 mm) clear of the front. King wants 1 1/2 in (38 mm) for both. Ouellet wants 3 in (76 mm) from the front. Cadet is the exception: it asks for 12 in (305 mm) clear in front, so floor-length curtains do not work over a Cadet.
How high above a baseboard heater should short curtains end?
At least 4 to 12 in (102 to 305 mm) above the top of the heater. King's CB drawing shows 4 in, Marley and King's K series 6 in (152 mm), and Cadet 12 in. On a heater 6 3/4 in (171 mm) tall, Cadet's rule puts the hem 18 3/4 in (476 mm) above the floor. Marley also says a long curtain must reach below the heater's centre line, so no hem may end level with the heater.
Can a couch be in front of a baseboard heater?
Yes, if it sits at the gap the manual gives. With a heater 3 3/16 in (81 mm) deep, a sofa back lands about 6 3/16 in (157 mm) from the wall for Ouellet, 9 3/16 in (233 mm) for Marley or King K, and 15 3/16 in (386 mm) for Cadet. Marley and King both say never to push furniture against the heater.
Can furniture touch hot water baseboard heat?
There is no fire rule against it. Slant/Fin says buyers are free to put furniture and drapes near or even touching its hot water baseboard. The cost is heat, not safety. Most of the heat comes from air rising through the cover, so a sofa pressed against it, or a skirt to the floor, starves it of air. Heating pros on HeatingHelp suggest 6 to 8 in (152 to 203 mm) for a sofa.
Can a bed go against a baseboard heater?
Not touching it. A bed is furniture, and bedding is on every maker's list of things to keep away. Cadet names pillows and bedding by name and asks for 12 in (305 mm). On a Marley or King K, keep the frame and anything that hangs down at least 6 in (152 mm) from the face. A duvet that slides off the bed into the gap is the usual way that gap gets lost.
Can a baseboard heater sit on carpet?
Yes. Cadet, Marley and King all say the heater may sit on any floor, carpet included. The rule is about the intake slot near the bottom. Cadet's sits 1 in (25 mm) above the floor and must not be blocked. King's K series allows up to 3/4 in (19 mm) of carpet around the heater, and a heater fitted before carpet should be raised to match.
Can you put a baseboard heater under an outlet?
No, for the heaters that say so. Marley and King's K series both say not to install the heater below an electrical outlet. A cord hanging from a plug would drop across the warm air at the top. All six electric manuals say to keep cords away from the heater, and Marley adds phone and computer cables.
Sources and standards referenced#
- The Cadet Electric Baseboard Owner's Guide, 240/208 volt models 2F350 to 10F2500 Cadet Manufacturing Co., 2012, as hosted by Lowe'sKept clear of all obstructions, 12 in in front and above, 6 in on both sides; 12 in from objects hanging above such as drapes; may sit on carpet, intake 1 in from the bottom
- D Series Commercial Baseboard Heater: Installation, Operation and Maintenance Instructions Marley Engineered Products, 5200-2113-003Furniture 6 in; 6 in above and in front recommended; long drapes below the heater's centre line, 1 in off the floor covering, 2 in from the front when open, 1 in to the ceiling; short drapes 6 in above; not below vinyl or plastic blinds and curtains, or an outlet
- K Series Element Baseboard Heater: Installation, Operation and Maintenance Instructions King Electrical Mfg. Co.Furniture 6 in for air flow; drapes 1 1/2 in from the front and above the finished floor, 6 in above for short drapes; carpet up to 3/4 in. The CB series guide and spec sheet are linked in the text
- High-End Baseboard Heater instructions (ODL), INS598 Ouellet CanadaFurniture, bedding and curtains at least 3 in from the front; 1 in at the bottom of drapes; 3 in for air flow. Indeeco's BCHI owner's manual, linked in the text, prints the same words
- Fine/Line 30 hot water baseboard radiation Slant/Fin CorporationFurniture and drapes near or even touching the baseboard; ratings at 140 to 220 F water; copper tube with aluminium fins
- Hydronic Baseboard Basics Journal of Light ConstructionFin-tube baseboard heat is mostly convective; at least 1 in of space beneath the enclosure
- Hydronic baseboard and furniture HeatingHelp forum thread, August 2022Practitioners' advice: 1 in of air under furniture and at the wall, a sofa 6 to 8 in out, drapes that block the top opening cut output
We cite published codes, industry planning guidelines and manufacturer specifications. Where a figure is our own recommendation rather than a published standard, the text says so. See how we measure.